The social elite on Öland and in Möre in the south east of Sweden during the Iron Age is described on the basis of the archaelogical record, such as graves, settlements and traces of pre-Christian central places. The material is discussed to see if traces of an elite are to be found. The Power configuration between Öland and Möre is also discussed.

If P&C Insurance Company faces a challenge when their treasury system needs a new interface to a software as a service application. They need a suggestion for configuration for how the system and the application can work together. The work presented in this report is a suggestion for how you can make business configuration of an IT-based Treasury System in general. The exact configuration for the case received from If is presented as a separate report, found in Appendix A and is called the If-report. The If-report presents the suggested technical set-up of the configuration.

This report explains the need to develop a configuration manager that handles transmission equipment which exists in the Swedish Defence telecommunications network. The configuration module will display the configurations and compatibility among the equipment and their software which are all part of the network.Also included in this report are tools, methods and results for the development of a prototype for the configuration manager. The prototype consists fundamentally of a database assisted by a user friendly website.The transmission equipment handles a lot of important transmission of information and is in the hands of a department of SAAB, OFGCA, by orders from the Swedish Defence Materiel Administration (FMV). Within the work included in this order exists a continuous update of both software and hardware which the equipment consists of. Therefore it?s highly important that there is a monitoring of which of the software and hardware is compatible with one another, ensuring that the functions of the system work properly.The consistent updating has resulted in compatibility issues between components and because of this, a need for a configuration manager has arisen..

The supply of uninterruptible power can be applied to many areas wherecontinuous operation is highly prioritized.The application of uninterruptible power for motor operation is facilitatedusing a frequency converter. Direct current operated frequency converters canbe applied directly to the power reserve which removes the need for additionalpower-converting.Batteries have long constituted the power reserve but advancements inthe development of ultracapacitors have created a viable substitution. Ultra-capacitors have high energy storing capabilities and can be applied to highpower applications.Maxwell is a leading manufacturing company of ultracapacitors and pro-vide different modules with built-in solutions for voltage balancing. Unevenvoltages between series-connected capacitors is a phenomenon caused by vary-ing capacitance. A configuration containing Maxwell?s 56V module is createdand constitutes the power reserve in the simulations.The discharge simulation shows a significant current that could damagethe system.

Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

The IPv6 protocol offers with some new functions, one of them is auto configuration. With auto configuration it is possible for nodes, i.e. hosts and routers, for automatically associated with IPv6 addresses without manual configuration. Auto configuration it is another protocol as it uses Neighbor Discovery protocol (ND) messages (ND is mandatory in the IPv6 stack). The main purpose of ND is that nodes can discover other nodes on the local link, perform address resolution, check that addresses are unique, and check the reachability with active nodes.There are exactly the same vulnerabilities of IPv6 as IPv4 and is now exception, ND if not properly secured.

This report present the design and manufacturing of a wide-band driver amplifier placed in radar module for airborne applications. The major goals for the amplifier were a high efficiency and to deliver a predefined output power. To reach the second goal an additional preamplifier had to be constructed. The amplifiers were constructed in three steps: Design and Layout in the software Microwave Office, Mounting components and Verification. The driver amplifier was decided to be a push pull configuration consisting of two parallel transistors biased in class AB.

The thesis presents an optimally designed kinematic structure for a new 6-DOF haptic devicebased on TAU configuration. The configuration of the TAU-2 proposed by Suleman Khan andKjell Andersson [1] was modified and its mobility was verified by using Grübler criterion tohave a 6 DOF. Analytical kinematic models for the inverse and forward kinematics weredeveloped for the haptic TAU configuration to determine a set of optimal design parameters.Kinematic performance indices such as volume of the workspace, kinematic isotropy and payload index, were defined based on the singular values of the Jacobian matrix. The Jacobianmatrix was scaled to homogenize the physical units. The Jacobian matrix dependent on theposition and orientation of the end-effector gives local isotropy and pay load index, so globaldesign indices were defined, which represent the performance of the mechanism in the wholeworkspace.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

We have studied how power is portrayed in Swedish journals by analyzing eight portraits of Swedish persons with economic or political power. We have studied how they and their power are described by the journalist in text and picture. We wanted to see which picture the journalist shows of people with power, what properties they are given by the journalist and how this picture is shown by the texts and the pictures. We have also looked if there are any differences between people with political power and people with economic power. We have under our studies noticed that the persons with power are described as very successful and special and this picture are shown in a very clear and unproblematic way..

This essay is about power in the classroom. It is about the power dimension of the student-teacher relationships that arise in that space. The overall aim has been to investigate which categories are fruitful in a power analysis of these relationships. My aim has therefore been to develop power categories and to use them to identify and to categorise cases of power interaction that take place between those particular actors in that particular setting.In order to gather material for my study I have both read literature that approaches the study of the student-teacher relationships from a power perspective and done a series of observations in a high school.My theoretical frame comprises a concept of power and a series of power categories. These categories include strength, authority, inducement, coercion, violence, resistance as well as to possess power, to have power, to exert power, the scope of power and the base of power.

The aim of this report was to investigate if Sweden can have 100 % renewable electricity production in the year 2050. The conclusion is that it is possible but under certain conditions. For instance wave power must be in commercial use. When wind power and solar power represent a large percentage of the electric production there will be a lack of electric power during the winter but during the summer there will be a surplus of electric power. Both the surplus and the lack of electric power need to be taken into account.

In order to fully grasp the phenomena 'City' we must understand its political structure as an integrated part of its physical structure and vice versa. This thesis focuses on one crucial element of the City, the public space, and discusses it in relation to the public realm, or sphere, of the City. The aim is to see if it is possible to conceive public space as a spatial dimension of power, and if so, how to analyse this. With the help of the theoretical tool of two ideal types of the configuration of public space, "The city as civic public life" and "The city as authoritarian control" an empirical study is carried out on the case of Prishtina, capital of Kosovo.Conclusions made are that function and use of a city's public spaces can be understood in relation to changes in the political climate of the society. Furthermore, a void in the asset of concepts offered by the ideal types is found ? and therefore also need for new concepts to describe and understand a public space undergoing a dynamic transformation, as being a part of a city in political transition..

Change is inevitable when software is built and deployed. It?s not particularly problematic to manage change if there is just one system. But in a large global IT organization, with several systems and people who develop, problems may arise. If organizations don?t control change, change will control the organization.

 With the increases in fuel costs due to the depletion of the world oil reserves and the increase of greenhouse gasses as a consequence to using oil as a fuel many companies are looking to new and innovative ways to power their aircraft. One of these new ways to power an aircraft is using fuel cells powered using hydrogen and oxygen, thus producing nothing but water vapour and small amounts of nitrogen dioxide as well as trace amounts of other emissions. Both Boeing (1) and Politecnico di Torino (2) have shown that it is possible to build an all-electric aircraft powered by fuel cells. Both flights used small, two-seater aircraft and a constant between them was the loss of the co-pilot seat due to weight and lack of space. As this paper will deal with a commercial aircraft a primary concern is the cargo and passenger capacity and whatever impact switching propulsion system has on these.